Do I Need Strata Approval to Repair Walls or Ceilings in a CBD Apartment?
You notice a crack running across your living room wall. Or there's a hole where a TV bracket used to be. Maybe you'd like to move a partition to open up the space. Before you call anyone, a question comes up: do I need strata approval to repair walls in my apartment?
In the Sydney CBD locality, this question applies to almost everyone. The 2021 Census found that 99.2% of occupied private dwellings here are flats or apartments. That means nearly every wall or ceiling job in a home here happens inside a strata scheme.
NSW strata rules sort renovation work into three categories: cosmetic work, minor renovations and major renovations. Each category has its own approval rules.
This plain-language guide explains which wall and ceiling work usually falls into each category, and who to check with before you book. We'll cover the strata categories, patching walls, changing walls, ceiling work, renting, heritage buildings and a short checklist to use before work starts.
Why strata rules shape almost every plaster job in the CBD
The Sydney CBD locality has a very different housing mix from the rest of the state. In the 2021 Census, flats and apartments made up 99.2% of occupied private dwellings here. Across NSW, the figure was 21.7%.
Separate houses are rare in the locality. The census counted just 9 of them, or 0.1% of occupied private dwellings.
Most homes here are also rented. In 2021, 72.0% of occupied private dwellings in the locality were rented, compared with 32.6% across NSW.
| 2021 Census | Sydney CBD locality | NSW |
|---|---|---|
| Flats or apartments (share of occupied private dwellings) | 99.2% | 21.7% |
| Rented (share of occupied private dwellings) | 72.0% | 32.6% |
Put simply, if you live in the CBD, your walls and ceilings almost certainly sit inside a strata scheme. A strata scheme is a building where each owner holds their own lot and shares parts of the building with other owners. That's why strata rules matter before you plan any wall or ceiling work here, and why many readers will also need to involve a landlord or agent.
The three NSW strata categories, as they apply to walls and ceilings
Under the NSW Government's strata renovation rules, renovation work in a strata building falls into one of three categories.
- Cosmetic work does not need approval.
- Minor renovations need approval.
- Major renovations can only be approved by the owners corporation. The owners corporation is the group made up of all the owners in the building.
Your scheme's by-laws can also add types of work to these categories. By-laws are the rules your strata scheme sets for the building. So the same job could be treated differently from one building to the next.
Here is how the official examples line up for wall and ceiling work:
| Category | Approval needed? | Wall and ceiling examples |
|---|---|---|
| Cosmetic work | No | Filling minor holes and cracks in internal walls |
| Minor renovations | Yes | Changes to internal walls; changes to recessed light fittings |
| Major renovations | Yes, by the owners corporation only | Check with your strata manager |
With almost every CBD home sitting inside a strata scheme, this framework is the starting point for nearly any wall or ceiling job in the area.
Patching holes and cracks in your walls
Do I need strata approval to patch holes or cracks in my apartment walls in NSW?
In most cases, no. Under NSW strata rules, filling minor holes and cracks in internal walls is an official example of cosmetic work. Cosmetic work does not need approval.
- Filling minor holes and cracks in internal walls is cosmetic work, with no approval needed.
- Changes to internal walls are different. They are minor renovations, which need approval.
- Your by-laws can add types of work to the categories, so check them and speak with your strata manager first.
The key word is “minor”. The official example covers minor holes and cracks in internal walls. If you're not sure whether your job fits that description, ask your strata manager before any work starts.
Once you've confirmed your job is a simple cosmetic patch, you can find out more about our gyprock wall patching and hole repairs.
Changing or adding internal walls (and recessed lights)
Patching a wall is one thing. Changing a wall is another.
Under NSW strata rules, changes to internal walls are classed as minor renovations. Minor renovations need approval before the work goes ahead.
The official minor renovation examples that relate to walls and ceilings are:
- changes to internal walls
- changes to recessed light fittings
So if you're planning to move a partition, open up a space or change how an internal wall is set out, treat it as work that needs approval. The same applies if you want to change the recessed lights in your ceiling.
Your scheme's by-laws may also affect how this work is treated. Before you book anyone, contact your strata manager or the owners corporation. They can tell you what your building needs from you before the work can start.
Ceiling repairs in a strata apartment: what to confirm first
Ceilings need a little more care. Changes to recessed light fittings are an official example of a minor renovation, so that work needs approval.
For other ceiling work, such as patching or repairs, the picture is less clear. The official example of cosmetic work covered earlier refers to internal walls. It doesn't tell you how a ceiling repair is treated in your building.
That's why the best first step is to check your by-laws and speak with your strata manager before arranging any ceiling work.
Questions to ask your strata manager
- Is this ceiling job cosmetic work, a minor renovation or a major renovation in our building?
- Do our by-laws say anything about ceiling work?
- Is the ceiling part of my lot, or is it common property?
- Who is responsible for arranging the repair?
- Who pays for the repair?
- Do I need approval before a plasterer starts work?
Once you've confirmed the next steps with your strata manager, you can read more about our sagging ceiling repairs.
Renting in the CBD? Start with your landlord or agent
Most people living in the Sydney CBD locality rent their home. In the 2021 Census, 72.0% of occupied private dwellings here were rented.
If you rent, speak with your landlord or agent before you book any wall or ceiling work. This applies even to small jobs, such as patching a hole. Let them know what the job involves and wait for their reply before work starts.
If you have questions about strata rules, NSW Fair Trading is a good place to start.
Heritage-listed CBD buildings: an extra council layer
Strata approval is one consideration. Council requirements are a separate one. In the CBD, some buildings are heritage-listed or sit within a heritage conservation area, and that can add a council step.
The City of Sydney explains that exempt development doesn't need council consent, and that this may include minor internal works. However, consent is generally required for development on heritage items or within heritage conservation areas.
For like-for-like replacement or repair work on heritage-listed buildings, the City of Sydney sets out two pathways:
- Local heritage items: this work is typically handled through a local heritage exemption request.
- State-listed buildings: the work needs both a local heritage exemption and a state heritage works approval.
Not every CBD apartment building is heritage-listed. If you think yours might be, check the City of Sydney's guidance on heritage exemptions for development consent before work starts.
Before you book: a quick pre-work checklist
Use this checklist before you arrange any wall or ceiling work in your apartment:
- Check your by-laws. They can add types of work to the strata categories.
- Work out which category your job likely falls into. Is it cosmetic work, a minor renovation or a major renovation?
- Ask your strata manager or owners corporation if you're unsure. This matters most for ceiling work and any change to an internal wall.
- If you rent, speak with your landlord or agent first. Do this before you book anyone.
- If your building may be heritage-listed, check with the City of Sydney. Council requirements are separate from strata approval.
- Take any strata questions to NSW Fair Trading.
Once you've checked with the right people and know your job can go ahead, get in touch with our Sydney plastering and wall and ceiling repair team to discuss your project.